ASES AVIATION SERVICES & SUPPORT INC.

PEAL AB

Peal operates in the field of materials handling, including fillers for filling products in sacks of 10-50 kg and in FIBC, and screening machinery. PEAL offers machines with high weighing accuracy, easy handling, low wearing and environmental sound designs.

Forceflow Fluidization Packer

Fluidization is a method that sets particles into constant motion in a stream of air, i e they behave like liquid. Material is kept in a fluidized state by air which is forced into the material chamber through porous pads. During the packing phase the material flows out through the filling tube into the valve sack. It is the most effective method to pack fine grained products and mixtures of powders and larger particles such as chemicals, mxtures of mineral, plastic powder and dry mortar.

Fills powder and mixtures of powder in valve sacks
Gross weight filling (simultaneous weighing and filling)
Fluidization principle
Gentle handling of materials
Few mobile machine parts-low wearing
Easy to clean
Smooth sack transfer
Electronic weight control system integrated in the PLC
Automatic control and alerts for material stoppage and faulty sacks

	Height	2540 mm
	Width	700 mm
	Depth	1630 mm
	Weight	650 kg
	Power consumption	0.1 kW
	Air consumption	30 L/sack^*
	Weighing range	up to 50 kg
	Capacity	up to 300 sacks/h^*
	Accuracy	± 150 gram
	Particle sizes	Suitable for particles up to 2.0 mm Possible for particles up to 8-10 mm
	Field of application	Powders and mixtures of powders and granules, both light and heavy
	^*Depending on material

Examples Of Products For The Forceflow

Ready mix (cement, sand)
CMC (carboxmethylcellulose) powder
Other powderous chemicals
PVC-powders (emulsion/suspension)
Other powderous chemicals
Pigment Powders

Chalk/gypsium
Talcum
Carbon Black
Titanium dioxide
Pigment Powders
Washing Powders

Kieseguhr
Silica Powders
Perlite
Kieseguhr
Soda
Lignine

Jetflow Impeller Packer

The JETFLOW impeller packer is used to dose fine, light products into valve sacks. Examples of these kinds of materials are flour, cement and lime. Materials is pressed by screws into an impeller wheel which throws it out through the filling tube. This results in high capacity and – with aerated material – provides at the same time a certain amount of compaction.

For fine, light materials
Fills up to 50 kg valve sacks
Electronic weight control system integrated in the PLC
Gross weight filler (simultaneous weighing and filling)
Frequence conformer controls the impeller
Coarse and fine feeding
Smooth sack transfer

	Height	1590 mm
	Width	650 mm
	Depth	1730 mm
	Weight	550 kg
	Power consumption	5.5 kW
	Air consumption	25 l/sack
	Weighing range	up to 50 kg
	Capacity	up to 350 sacks/h^*
	Particle sizes	Suitable for particles up to 0.5 mm Possible for particles up to 1.0 mm
	Field of application	Light, small sized materials
	Accuracy	± 150 gram^*
	^*Depending on material

Beltflow Belt Packer Type PB

The BELTFLOW Belt Packer Type PB is designed to dose all types of free-flowing products. The packer is especially suitable for granular, slaky and crystalline products. The material is dosed with a vibrating flute and a butterfly valve.

Fills all types of free-flowing products
For valve-sacks, paper or plastic
Electronic weight control system integrated in the PLC
Easy to adjust to various sack-sizes
Gross weight filling (simultaneous weighing and filling)
Coarse and fine feeding
Easy to clean

	Height	2680 mm
	Width	1200 mm
	Depth	1400 mm
	Weight	800 kg
	Power consumption	0.5 kW
	Air consumption	20 l/sack
	Weighing range	15-50 kg
	Capacity	250 sacks/h^*
	Accuracy	± 1% in service ^*
	Particle sizes	Suitable for particles up to 0.5-6.0 mm Possible for particles up to 8mm
	Field of application	Granular, flaky and crystalline products
	^*Depending on material

Gravflow Gravity Packer GP200

The GRAVFLOW Gravity Packer does all types of free-flowing granules through a vibration feeder. Material is led from a scale down into a filling to a filling tube, on the lower part. The material can be filled in valve sacks, open mouth sacks or barrels. It is an effective method to pack minerals like sand, pellets, granulated sugar, plastic granules, crushed minerals, seed, briquettes and similar products.

Fills all types of free-flowing granules
Available for open sacks and valve sacks
Easy to adjust to different sack-sizes
Electronic weight control system integrated in the PLC
Gross weight filling (simultaneous weighing and filling)
Gentle handling of materails
Is equipped with fluidization spots for handling of viscous materials
Easy to clean


	Height	2020 mm
	Width	1000 mm
	Depth	770 mm
	Weight	800 kg
	Power consumption	0.5 kW
	Air consumption	20 l/sack
	Weighing range	up to 50 kg
	Capacity	up to 250 sacks/h^*
	Particle sizes	Suitable for particles up to 0.5-6.0 mm Possible for particles up to 8 mm
	Field of application	Free-flowing, granular products
	Accuracy	± 200 ^*
	^*Depending on material

Sackflow Valve Sack Applicator

PEAL has for many years developed rational and practical solutions for the filling of bulk-material. The Sack Applicator reduces the risks of work related injuries and gains greater efficiency and productivity.

Serves one to three filling tubes
Fits most of the Valve Sack Fillers on the market
For plastic- or paper-sacks with valves from 7.5 to 18 cm
Reloading of empty sacks does not interrupt the operation
A PLC control system for easy adjustments to the operation
Linear motions for optimal reliability of operation
A compact and flexible solution

	Height	2300 mm^*
	Width	1540 mm^**
	Depth	2400 mm
	Weight	400 kg
	Power consumption	1.1 kW
	Air consumption	43 l/sack (6 bar)
	Weighing range	up to 50 kg
	Capacity	PP1 300 sacks/h Magazine>200 sacks PP2 550 sacks/h^= inkl Sack Magazine PP3 800 sacks/h^*= inkl Applicator Arm

Bigflow FIBC-Filler

The BIGFLOW enables to handle large volumes of bulk materials.

Fills all kinds of bulk-material
For all kinds of FIBC with one to four loops, with or without inner-bag
Easily adjustible to different bag-sizes
Electronic weight control system integrated in the PLC
Few mobile parts-low wearing
Gross weight filler (simultaneous weighing and filling)
Dosing with all kinds of feeders

	Height	2800 mm
	Width	1600 mm
	Depth	1900 mm
	Weight	650 kg
	Power consumption	1.1 kW
	Air consumption	26 L/bag^*
	Bagweight	up to 1500 kg
	Capacity	up to 30 bags/h^*
	Accuracy	± 0.5% ^*
	^*Depending on material

Weighing Control Computer

Electronic weight control system integrated in the PLC
Pre-programmed functions
Adaptions to all material charactaristics are easily made via the keyboard
Automatic filling control alerts in case of errors
Continuous operation statistics
The after-flow is automatically adjusted to obtain heighest weight accuracy

Standard Functions in the PLC

Pre-setting of required weight
Digital display of sack-weight during filling
Pre-setting of tolerances 1 and 2
Statistics on number of filled sacks
Statistics on sacked weight in metric ton
Statistics on right and wrong weight
Statistics on operation time
After-flow control. Automatic manual

Selector guides and data sheets for all the above mentioned products are available on request.

ASES AVIATON SERVICES & SUPPORT INC.